device. If phone requires password then input "0000". When the connection is successfully
arranged then the Sound & Cool is working as external speaker for your mobile/tablet. When
the connection is disconnected the voice prompts this for example "bluetooth disconnected."
After 5 minutes the connection will be resettet. The connection will automatically be
reconnection when your mobile/tablet will come back to range of the device.
2)
External audio mode/ AUX mode
"USB" is displayed. Connect the your device to upper USB port. The Sound & Cool supports
MP3/WMA/APE/FLAC/WAV Voice prompts "USB Mode". The
Sound & Cool will play the music from your USB device.
When the connection is disconnected the voice prompts this
"USB disconnected."
Only the upper USB port is suitable for playing of music.
Pause of Music
To pause the music player you have 2 options:
Press Pause/Play on your external device (your mobile/tablet).
Press
for 3 seconds to unlock the control panel and again to pause the music
player. The display shows:
shows:
The display shows „LINE" and the voice
prompts: "external audio mode". The
Sound & Cool can be used as external
audio of your mobile / tablet by inserting
a 3,5 mm audio cable for connection with
your mobile/tablet. Then you can control
the music using your mobile/tablet.
In this mode the control panel of the
device cannot be used for switching to
previous/ next title, use yor mobile/tablet
for this.
3)
. With
you can restart the player and the display
USB mode
43