Restore Factory Settings - Alesis VIRTUE AHP-1 Guia Del Usuario

MIDI
Virtue features traditional 5-pin MIDI IN and OUT ports, as well as a USB-MIDI connection so that
you can use it with educational or recording software on Mac or PC.
To set the MIDI receive and send channels, press the Function Menu button repeatedly until the
MIDI IN or MIDI OUT setting is selected, and then use the +/– buttons to select the MIDI channels.
Memory
The memory feature on Virtue enables you can to quickly store and recall four presets of your
favorite settings.
The following parameters are stored in each preset:
•
Voice Parameters: main voice, layer voice, split point voice, reverb, chorus, mixer.
•
Accompaniment Parameters: style, tempo, auto/full range chord
•
Function Parameters: touch
These four different presets are divided into two banks, B1 and B2.
To access presets 1 and 2, press the Bank button until B1 is lit on the display screen, and
then press the M1 or M2 buttons. To store your current settings to preset 1 or 2, hold the
Store button, and then press the M1 or M2 buttons while this bank is selected.
To access presets 3 and 4, press the Bank button until B2 is lit on the display screen, and
then press the M1 or M2 buttons. To store your current settings to preset 3 or 4, hold the
Store button, and then press the M1 or M2 buttons while this bank is selected.

Restore Factory Settings

To restore Virtue to its factory default settings and delete all recorded song data, press and
hold the + and – buttons together while powering on the piano.
18