Aiwa LED-405FHDSMART Manual De Usuario página 5

8
en
DISASSEMBLY AND INSTALLATION
WALL-HANGING BRACKET
An optional wall mount can be used with
your television.
Consult with your local dealer to purchase
the recommended wall mount.
Carefully attach the wall mount bracket
at the rear of the TV.
Install the wall mount bracket on a salid
wall perpendicular to the floor.
lf you are attaching the TV to other buil-
ding materiaIs, please contact qualified
personnel to install the wall mount.
Detailed instructions will be included
with the wall mount.
Please use a wall mount bracket where the
devices is adequately secured to the wall
with enough space to allow connectivity
to external devices.
- Disconnect the power before moving
or installing the TV. Otherwise electric
shock may occur.
- Remove the stand before installing the TV
on a wall mount by performing the
stand attachment in reverse.
- lf you install the TV on a ceiling or
slanted wall, it may fall and result in
severe injury. Use an authorized wall
mount and contact the local dealer or
qualified personnel. Otherwise it is not
covered by the warranty.
- Do not over tighten the screws as this
may cause damage to the TV and void
your warranty.
- To prevent injury, this apparatus must
must be securely attached to the
floor/wall in accordance with the
installation instructions.
- Use the screws and wall mounts that
meet the fallowing specifications.
Any damages or injuries buy misuse
or using an improper accessory are
not covered by the warranty.
Notes:
1. For the TV sets with terminals towards
the wall, in order to leave enough space
to use the terminals, a rubber cushion is
needed together with each screw to fix
the wall mount.
lt is small hollow pillar whose internal
diameter is 8mm, external diameter is
18mm and height is _ > 15mm.
2. The information in this document is subject
to change without notice. The manufacturer
accepts no liability for damage resulting
directly or indirectly from faults, incomple-
teness or discrepancies between trouser
manual and the product described.
In dry environment due to static electri-
3.
city, the product may restart and return
to the main OSO interface, USB player
interface or the previous source mode. lt
is normal and please continue to operate
the TV as you will.
CONNECTIONS
TERMINALS
ANTENNA IN
Connect a coaxial cable to receive signal
from the antenna, cable or satellite.
USB
USB port.
DIGITAL AUDIO OUT
Use a coaxial cable to output your TV
audio signal to a compatible audio receiver.
EARPHONE
Speakers will be muted when earphones
are plug.
SERVICE
Only for the technician.
Notes:
•
External equipments and cables shown herein are not supplied with theTV.
•
Some terminals may differ by different regions or models, and please take your actual TV set as
the standard.
HDMI
Connect HDMI input signal from signal
source such as a DVD player.
AV IN
Connect audio and video signal from
signal source such as a DVD player.
LAN
Network port.
CI
CI card port.
9