Product Setup - D-Link DHP-W313AV Guía De Instalación Rápida

PrOdUCT SETUP

HARDWARE INSTALLATION AND CONNECTION
ROOM A
Internet Router
ROOM B
DHP-W312AV
Note: Network connectivity is confirmed when the Powerline LEDs indicators on both Powerline
devices are steadily lit. This will indicate that your network is now secure.
USING THE SETUP WIZARD
Step 1:
To access the configuration utility, open a web browser such as Internet Explorer and either enter the
address written on the Wi-Fi Configuration Card or one of the following in the address field:
http://dlinkapWXYZ.local./ (WXYZ are the last 4 characters of the DHP-W313AV's MAC address).
Step 2:
By default, Admin will be the User Name. Leave the password blank.
DHP-W313AV
Step 1:
DHP-308AV
Ensure that the DHP-308AV is connected to your router, a
nearby power outlet and is already set up.
Step 2:
Plug the DHP-W312AV into a wall outlet where you want
to extend your network and connect it to a computer via
Ethernet cable (for the setup wizard).
Step 3:
Press the Simple Connect button on the DHP-308AV
device for 3 seconds. Then, within two minutes, press the
WPS (Simple Connect) button on the DHP-W312AV for
3 seconds. The Powerline devices will then reboot and
connect.
3