AllPondSolutions All-in-one cup-311 Manual Del Usuario página 6

DIMENSIONS
38 7 m m
MAINTENANCE
It is recommended that every three - four weeks you perform
maintenance on the CUP-311.
Depending on your pond volume, stock levels and season this may
need to be completed more or less often.
All parts should be cleaned using pond water clear from your pond.
1) Open the CUP-311 by unfastening the casing clips (parts 4) and
removing the filter casing (part 3).
2) Remove the filter baskets (parts 8) from the CUP-311 and clean
through the included media and coarse foam (part 5).
3) Remove the pump (part 12) from the CUP-311 and clean, including
the impeller and shaft (parts 12-3, 12-5).
4) Remove the UV clarifier (part 6) from the CUP-311 and clean,
including the UV Quartz (part 6-3), ensure all O-rings are replaced
correctly.
5) Thoroughly clean the CUP-311 filter casing (part 3) and filter body
(part 10) as well as all attachments.
6) Reassemble the CUP-311.