Cable Association Procedure - TRUlink 81667 Manual Del Usuario

A
PPENDIX
C A
ABLE SSOCIATION
Cable association steps. Examples/Figures shown are used with the association of the TruLink Wireless
USB to VGA with Integrated Audio Kit.
1. Make sure that the Wireless USB host adapter utility is running. Check your Windows tray for the
Wireless USB Manager icon (Figure: Wireless USB Manager).
2. Make sure the WIRELESS/WIRED switch is in the WIRELESS position on the Wireless USB to VGA
with Integrated Audio Adapter.
3. Plug in the power adapter for your TruLink Wireless USB to VGA with Integrated Audio Adapter.
4. Connect the USB cable between an available USB port on your computer and your Wireless USB to
VGA with Integrated Audio Adapter.
5. Complete cable association by pressing the "Accept Association" button when prompted (Figure:
Cable Association).
6. Remove the USB cable from your Wireless VGA with Integrated Audio Adapter and computer.
35
P
ROCEDURE
Figure: Cable Association