Brandson 303269/20180428CZ009 Manual De Uso página 37

9. Changing the battery
Unlock the battery by pressing the "Battery unlocking" button (1) and
then slide the battery out of the device (2). To insert a new battery, slide
the battery into the cordless screwdriver on (2) until it locks into place.
10. Charging the battery
Charge the battery using the charging station provided. A status LED is
located on the charging station. As long as the LED is red, then charg-
ing is in progress. When the LED turns green, the battery is then fully
charged and can be reused.
There is also a charging level indicator on the battery itself. Press the
button shown in the figure below. The table below shows the charging
level indication and its meaning.
37
English