Alarm Task - Logan L-A846-ND Manual De Instrucciones

◆ Start record: It will record the selected channels
◆ Call preset: It will adjust selected preset of PTZ channel
◆ Snapshot: It will snapshot the selected channel and save images.
◆ Output Module: It will open alarm for the relative device (normal close)
2.Click【ok】,save setting
Step 4：Detect Alarm device
1. Touch alarm device
2. Selected alarm out parameter setting work normally
3. Top menu will popup alarm coin, and record log at same time

4.5.4 Alarm task

Function position：System setup| Alarm| Alarm task
Function introduction：It only send alarm output in
User Manual
preset time
68/183