Insignia NS-BRDVD Blu-ray Disc Player
Adjusting the component resolution
To adjust the component resolution:
1 In stop mode, press SETUP.
2 Press
or
to select
The Custom menu opens.
Custom
3 Press
or
to select VIDEO, then press
ENTER. The Video menu opens.
4 Press
or
to Component Output, then
press ENTER repeatedly to select a
resolution.
5 Press SETUP to close the menu.
Selecting the audio CD audio mode
To select the audio CD audio mode:
1 During playback, press AUDIO
to select:
•
Stereo—Both right and left audio
channels are active.
•
L-ch—Only the left audio channel is
active.
•
R-ch—Only the right audio channel is
active.
2 Press AUDIO
Note
Selecting audio streams or channels is not
available for DTS-CD (5.1 music disc).
, then press ENTER.
repeatedly
to close the menu.
www.insignia-products.com
Setting the Blu-ray audio mode
Audio recording
Disc type
format
Blu-ray
Dolby Digital
Dolby Digital Plus Dolby Digital
Dolby TrueHD
DTS
DTS-HD
LPCM
DVD
Dolby Digital
DTS
LPCM
Audio CD,
MP3, WMA
DTS-CD
Notes
1
If the BD Audio Mode option is set to Mix Audio
Output, audio is output as multi LPCM.
2
Outputs audio signals decoded from an
independent substream.
3
Outputs audio signals decoded from the Dolby
Digital stream.
4
Outputs audio signals decoded from the DTS
core stream.
If the connected device is not compatible with the
HDMI BITSTREAM, audio will be output as
multi LPCM or 2-channel down-mixed LPCM
depending, on the capability of the connected
device, even if you set the HDMI Audio Out option
to HDMI Multi (Normal).
When you select Audio Mute, audio signals
from the HDMI OUT jack are muted and the
signals are sent to the DIGITAL OUT jack.
HDMI Audio Out setting
HDMI Multi
HDMI Multi
(Normal)
(LPCM)
Multi LPCM
1
Dolby Digital
2
Multi LPCM
1
Plus
1
3
Dolby TrueHD
Multi LPCM
Multi LPCM
1
DTS
1
4
DTS-HD
Multi LPCM
Multi LPCM
Multi LPCM
Dolby Digital
Multi LPCM
DTS
Multi LPCM
Multi LPCM
Multi LPCM
2-channel
2-channel
LPCM
LPCM
DTS
Multi LPCM
21