Ringer Volume - Spracht AURA SOHO Manual De Instrucciones

MUTE button will be on when muted. While in MUTE mode, you will be
able to hear the other end of the call, but they will not hear you. Press the
MUTE button again to resume speaking to the caller(s). The red light will
go out.
CONFERENCE NOW
The patented ConferenceNow™ button allows for you to press one button
to connect with the Conferencing Service.
FLASH
The FLASH button is for three way conferencing. It allows you to put
your first caller on hold while dialing the second number. Dial your first
number normally. When the person is on the line, press the FLASH button
and you will hear a second dial tone. Dial the second number. When that
person is on the line, press the FLASH button again and all three of you
will be on a conference call.

RINGER VOLUME

There is no way to completely turn off the ringer, but the volume can
adjusted using the procedure below.
1. While the unit is OFF, press the REDIAL button.
2. Hold it down for 5-10 seconds until the keypad lights up.
3. Continue to hold for another 3 seconds, until the keypad starts to flash.
4. Release the REDIAL button. The Aura SoHo™ Conference Phone will
ring once. You can now adjust the volume.
5. Press the Volume Up and Volume Down key to adjust the volume.
6. Once you have your desired ringer volume, press the HOLD key. This
saves the volume level into memory and returns the Aura SoHo™
Conference Phone to OFF mode.
11