Packaging Contents - Yealink CP960 Guia De Inicio Rapido

Packaging Contents

IP Phone
Note: The CPW90 helps you to expand the audio range of the IP phone. For more information, refer to Yealink CPW90 Quick Start Guide.
We recommend that you use the accessories provided or approved by Yealink. The use of unapproved third-party accessories may
result in reduced performance.
Assembling the Phone
1. Connect the power and wired network.
2m
You can also connect to the wireless network after startup. Refer to Wireless Network Connection mentioned
below in Configuring Your Phone for more information.
Note: The IP phone should be used with Yealink original PoE adapter (54V/0.56A) only. The use of the third-party PoE adapter may cause the
damage to the phone.
The cable and wire should be replaced at once if its skin is broken.
Ethernet Cable (7.5m
CAT5E UTP cable)
X 2
Wireless Expansion Mic Charging Cradle
CP Wireless Expansion Mic CPW90
(Optional)
7.5m
Quick Start Guide CP Wired Expansion Mic CPE90
0.3m
Quick Start Guide
Micro USB Cable
X 2
(Optional)
Ethernet Cable (2m
PSE
Power Cord
CAT5E FTP cable)
PoE Adapter
(Optional)
E
N
G
L
I
S
H
1