Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Product assembly
1. Take the product out of the packaging.
2. Check to make sure that all parts are included (see Fig. A).
3. Check whether the product or individual parts are damaged. If this is the
case, do not use the product.
Basic cleaning
1. Remove the packaging material and all plastic wrappings.
2. Clean all parts of the product before first use as described in the chapter
"Cleaning".
Product assembly
WARNING!
Risk of injury!
If you are not careful when assembling and setting up this
product, you may pinch your fingers, hands and/or toes, or
cause personal injury.
− The product has separate parts which must be assembled
before use. The product also has moveable components
which must be secured before use. Be careful and
mindful of where you place your fingers and hands while
assembling the product.
− Keep children and pets away from the product during
assembly and disassembly.
− Be aware of the height of the product and the length of
the extenders. You may accidentally injure yourself.
1. Install the swivel castors
(see Fig. B).
bases
7
Engage the locking levers of the swivel brake castors to prevent unintended
rolling during installation.
2. Connect the bases together with the base bars
3. Insert the vertical bars
Make sure the holes on the vertical bars are at the upper ends.
4. Insert the lower hanging bar
T-connectors to the top of the vertical bars (see step 2 in Fig. D).
10
10
and swivel brake castors
into the bases (see step 1 in Fig. D).
4
3
into the T-connectors
11
under the
(see Fig. C).
5
8
and attach the
Publicidad
Capítulos
Tabla de contenido
