Zennio IDAC Manual De Instalación página 10

ASSEMBLY OF THE IN-DOOR, FLUSH-MOUNT ELECTRIC LOCK
10
* External view
1
Insert the electric lock into the gap made in the door; the cable must
be passed through the upper hole and it must be recovered from the
internal side of the door.
* Note: Images show the assembly for a left-hand door. For right-hand doors the assembly is symmetrical.
(See https://www.zennio.com/download/idac_technical_note_door_direction_din_107_en for left-hand/right-
hand description).
© Zennio Avance y Tecnología S.L.
Electric lock parts
1
2
11
Ed. 3
3
4
5
6
7
8
9
2
Once the electric lock is inserted, place the cylinder into its hole
(from the external part of the door) and fix it using the cylinder screw
(with the key inserted and rotated).
Further info: www.zennio.com
1. Door
2. Electric lock cable (1x)
3. Zennio electric lock (1x)
4. Cover (1x)
5. Screw for electric lock (2x)
6. Battery (1x)
7. Screw for cover (1x)
8. Cylinder screw (1x)
9. Cap (1x)
10. Cylinder key (1x)
11. Cylinder (1x)
(5)
(5) Wood screw
Ø4 x 20 - countersunk
2x
Page 2 / 8