Fault Code - meireles MLR 1491 W Manual Del Usuario

C. Fault code
The asher stops hen the program is running. The display indo sho s
fault code "F13", "F14", "F24", else fault codes from "F04" to "F98" or "Unb".
Door lock is abnormal. Start program for 20 sec and unlock the asher door
(PTC) to check hether the door is closed.
Open or close it again.
After fault is removed, press "Start/Pause" key. If fault occurs again, disconnect
po er supply and contact ith after-sale service.
Door open fault.
Action: Press "Start/Pause" button. The ashing machine ill try to open the door.
The alarm ill not be removed until the door is unlocked. Or, turn the nub to Off for 3
seconds to turn off the machine. Choose the desired programmme to start the
machine. The alarm ill be removed.
Water level reaches overflo level.
Remove it by pressing "Start/Pause" key and feed ater.
Select and start required program. If fault occurs again, disconnect po er supply
and contact ith after-sale service.
If fault code "F04" to "F
Electronic module fails.
Turn the nub to Off for 3 seconds to turn off the machine.
After fault is removed, press "Start/Pause" key. If fault occurs again, disconnect
po er supply and contact ith after-sale service.
nb" is shown
Unbalance alarm shall be solved by the follo ing methods
1.Laundry inding
Turn the knob to "off" for 3 seconds for shutdo n, open the door, shake the clothes and
put them back into the ashing machine, then select the single de atering program to
dry again.
2.Too light- eighted laundry
Turn the knob to "off" for 3 seconds for shutdo n, open the door, put in one or t o
to els, and then select the single de atering program to dry again.
" is shown
18