Numark VirtualVinyl Guia De Inicio Rapido página 10

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

DJING WITH ONE TURNTABLE/CD PLAYER
VirtualVinyl's flexible time-code control allows you to easily mix with only one turntable. Please
see below for instructions on how to DJ using only one turntable.
1.
Press the CONFIG button at the top right
corner of the screen to access the
VirtualVinyl's preferences.
2.
Select Single Timecode under the
Inputs pull-down menu.
3.
Click on Timecode Config... to access
the
timecode
calibration options.
4.
In the Timecode Config... menu, please
run
the
automatic
clicking on the Auto-Config button.
Remember that the timecode needs to
be playing while you run the automatic
configuration.
5.
Once you have configured the
timecode options, please exit
the Config menu.
You will notice to the side and under each virtual deck there is a button
labeled TIMECODE (shown on right). You can choose between which of the
two decks you are controlling with the timecode signal by pressing the deck's
Timecode button. The button will illuminate to let you know which deck is
being controlled by the timecode.
1.
On deck A, begin playing a track with your timecoded vinyl or CD.
2.
While the track is playing, click deck A's TIMECODE button to disable the deck's timecode
control. You can now pause your turntable or CD player – the music will continue playing.
3.
Now load a track to deck B and click deck B's TIMECODE button to enable timecode
control on deck B.
4.
Using your timecode vinyl or CD, you can now cue and mix the track on deck B with the
music playing on deck A.
5.
Once you have finished the transition to deck B, you can disable deck B's timecode
control – the music will continue playing.
6.
Click deck A's PAUSE button to stop the music playing on deck A.
7.
Now load a track to deck A and click deck A's TIMECODE button to enable timecode
control on deck A.
8.
Using your timecode vinyl or CD, you can now cue and mix the track on deck A with the
music playing on deck B.
9.
Once you have finished the transition to deck A, you can pause the music on deck B.
10. Repeat the procedure starting from #2 above to continue mixing.
configuration
and
configuration
by
8

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido