Installation
Dimensions
1
Installation
Remove the plastic dust plug from the bottom of the yoke
assembly and discard.
Do not attach body wash spray head at this time.
Attach the pressure gauge to
B
the adapter on the pressure
side of the tank with pipe
sealant (by installer).
NOTICE! When attaching the pressure
gauge and hose spray to the tank
outlet, hold the adapter (item 3) with a
wrench to prevent stripping. Failure to
do so may damage the seal and cause
leakage. Max. torque 150 in-lbs.
netzerotools.com
25"
(635mm)
8½"
(216mm)
netzerotools.com
Body Wash Spray Head
Connect the hose with appropriate
A
pipe sealant (by installer). Do not
use sealant tape.
10/19/2012
S19-670
3