Cooper Tools Campbell GXL Manual Del Operador página 10

10. Operating temperatures: Unless otherwise
specified in the application section of this
manual, Campbell clamps are designed to
operate only in temperatures ranging from 0°F to
200°F. This range applies to both the ambient and
material temperatures.
WARNING:
using Campbell clamps in temperatures not within
this range.
11. Locking clamps: Clamps equipped
with a lever and spring, or a tension
arm and a chainpull that places
and keeps the cam in contact with
the plate. The mechanism
facilitates attaching and
removing the clamp.
WARNING:
a clamp's locking mechanism during a lift.
12. Lock open-lock closed: A lever or chain activated
spring holds the cam away from or in contact
with the plate, and this makes clamp operation
easier. The Campbell "GXL" and "E" clamps have this
feature. These clamps will not lift the plate when in
the "lock open" position.
WARNING:
13.
apprising the operator and others that they should
protect themselves.
10
Contact Campbell Chain before
Never tamper with
A notice pointing out danger,