Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
7/ SUPPLEMENTAL AMD® INSTALLATION GUIDE
a/ Apogee Drive conversion from Intel Socket 775 to AMD Universal housing
1. Loosen and set
aside all 6 screws as
shown above.
5. Remove the o-rings
from the socket 775
housing ...
b/ Installation on the motherboard
Socket AM2
8. MAINTENANCE
Check your coolant level once a year; the radiator fill-cap features a dip-stick for your
convenience,
As long as your system has been properly sealed, refill should not be necessary for up to 5
years. If needed, you can top-off the level with the coolant mix recommended above.
Clean the computer filters as frequently as necessary. They should be free of dust at all times.
Regularly inspect your radiator and fan for dust, and clean as necessary.
2. Remove and set aside
the copper base-plate.
...and install them to the
AMD housing.
3. Remove and set
aside the base-plate
o-ring.
6. Place the AMD
housing onto the
Apogee Drive body.
Socket 754/939/940, and F
4. Remove the
socket 775
housing.
7. Install o-ring,
base plate, and
fasten all 6
screws.
Page 6
Publicidad
Tabla de contenido
