Turning Your Phone On And Off; Access Codes - LG CG300 Guia Del Usuario

CG300 Cingular E_060831_1.1 2006.9.1 2:7 PM 페이지19
If the battery fails to charge completely:
]
After turning the phone on and off, please attempt to
recharge the battery.
]
After detaching and reattaching the battery, please
attempt to recharge the battery.

Turning Your Phone On and Off

1. Press the [END] key to swith on the phone.
2. If the phone asks for a PIN, enter the PIN and press
the key.
The phone searches for your network and after finding
it goes to the idle screen as illustrated below. From the
idle screen, you can make or receive a call.
n
Note
The display language is preset to Automatic at the factory.
To change the language, use the Languages menu option
(Menu 9.2.4).
3. When you wish to switch the phone off, hold down
the [END] key until the power-off image displays.

Access Codes

You can use the access codes described in this
section to avoid unauthorized use of your phone. The
access codes can be changed by using the Change
Codes feature (Menu 9.6.3).
Security code (4 digits)
The security code protects the unauthorized use of
your phone. The default security code is set to '0000'
and the security code is required to delete all phone
entries and to activate the Restore Factory Settings
menu. The security code default setting can be
modified from the Security Settings menu.
Getting Started
19