LiftMaster KPW5 Manual De Instrucciones

OVERVIEW
Wireless Commercial Keypads are security keypads and should be programmed to ONE operator.
The Wireless Commercial Keypad comes with one 9V Lithium battery, instructions, and two keys. A wireless signal is
transmitted when a valid 4-digit PIN and the # key is pressed. A long tone will sound. The keypad backlight will illuminate for
15 seconds when any key is pressed. If an invalid PIN or partial PIN is accidentally entered, an error tone will sound. The
Wireless Commercial Keypad is compatible with the brands of commercial door and gate operators listed in the table below.
MODEL FREQUENCY AND ENCRYPTION
KPW5 LiftMaster Security+ 2.0
Tri-band 390 MHz, 315 MHz, and 310 MHz
KPW250 LiftMaster Security+ 2.0
Tri-band 390 MHz, 315 MHz, and 310 MHz
LiftMaster Security+
LiftMaster Security+
Linear Multi-Code 300 MHz
KPW5
Specifi cations
Power ..................................................................................................................................................................... 9V Lithium battery
Operating temperature range .............................................................................................................. -4°F to 140°F (-20°C to 60°C)
Storage and shipping temperature range ......................................................................................... -40°F to 140°F (-40°C to 60°C)
Enclosure .............................................................................................................................................................................. NEMA 3R
® Default
® Default
® 315 MHz
®
390 MHz
1
Wireless Commercial Keypad
Models KPW5 and KPW250
PIN CAPACITY
Up to 5 permanent PINs and
Up to 10 unique temporary PINs
Up to 250 permanent PINs and
Up to 10 unique temporary PINs
KPW250