POLTI Magico AG130 Manual De Instrucciones página 9

3. VAPORISER
ASSEMBLY
Unscrew the sprayer from the bottle.
Insert the washing support into the sprayer
and lock it with the fastening ring.
Insert the cloth and lock it.
FILLING
Tighten the sprayer including the washing
support with the cloth, to the bottle.
USE
2.4 Once the cleaning
operation is finished,
turn off the appliance
by moving the switch
backward.
Fill the bottle with
water and possibly
non-foaming glass
detergent that
commonly available on
the market.
Spray the surface to be
cleaned and clean with
the cloth.
Run the appliance over
the area as described in
the Chapter "Use".
4. EMPTYING THE DIRT
COLLECTION TANK
When the dirty water in the tank has reached
its maximum level, the tank must be emptied
as follows:
4.4 Replace the tank stopper.
is
4.5 Resume cleaning operations.
WARNING: If the maximum filling level is ex-
ceeded, small quantities of water can leak
out of the ventilation slots. Always empty
the tank before the maximum filling level is
reached.
5. CARE OF YOUR APPLIANCE
Before performing any maintenance operation,
make sure that the appliance is off and/or
| 9 |
4.1 Turn the appliance
off.
4.2 Pull the tank
stopper.
4.3 Tilt the tank and
drain the dirty water.