Charging The Battery - POLTI Magico AG130 Manual De Instrucciones

PROPER USE OF THE PRODUCT
This appliance is intended for home use for
cleaning damp, smooth surfaces such as
windows, mirrors or tiles, in accordance with the
instructions provided in this manual. The
appliance is not intended to vacuum up
spillages on the floor, drains or containers.
Only use this appliance with conventional
window cleaners (no alcohol or foam cleaners).
Please use this appliance only with accessories
and spare parts approved by POLTI.
Please read these instructions carefully and keep
them for future reference.
Polti declines liability for any damage or acci-
dent derived from any use of this appliance
which does not comply with the instructions
contained in this booklet.

1. CHARGING THE BATTERY

To reduce the risk of personal injury
unplug the power cord from the
electrical outlet and let the appliance
and the accessories cool down completely
before handling.
Always make sure that the appliance is
unplugged
maintenance
including adding water or cleaning the
appliance.
The appliance is not supplied with the battery
charged, therefore please charge the product
before use.
To charge the appliance, proceed as follows:
before performing
work of any kind,
connect the power supply plug to the special
socket of the appliance and insert the power
supply plug to a suitable power socket.
The charging / operating LED will start
flashing red. When the LED turns a steady
green (after about 2 1/2 hours), the appliance
is charged and ready for use.
When the battery is discharged, the
appliance will stop working and the LED will
be off. A full battery recharge makes it
possible to clean up to 860 ft .
2. USE
| 8 |
2.1 Connect the window
cleaning frame to the
base until it is locked.
2.2 Turn on the
appliance by moving
the switch forward. The
operating / recharge
LED will turn on.
2.3 Place the window
cleaning frame on the
upper part of the
window and using a
slight pressure move
downward.