5.2.1.2 Radio
The functions for the Radio submenu are the same
●
as those described for the TV submenu.
(See section 5.2.1.1).
5.2.1.3 Recorder
View the list of recordings found on the USB device
●
connected to the receiver.
Select a recording using the PR- and PR+ keys.
●
Press "OK" to play the recording on the preview screen.
Press the yellow key on the remote control to change
to full screen view.
Recording a programme
In normal operating mode, press the "RECORD" key
●
on the remote control. A message will be displayed on
screen in which it is possible to change the programmed
recording time. The maximum recording time depends
on the space available on the USB device.
Press the "OK" key to begin the recording .
●
While the programme is being recorded, only
●
programmes from the same multiplex can be viewed.
Press the "STOP" key on the remote control to stop
●
the recording before the programmed time is completed.
Time-Shift Function
Use this function to pause a programme and continue
●
watching it later at the same point where you left off.
Press the "PAUSE" key to activate the function.
●
The picture freezes, the programme starts to be recorded
on the USB device connected to the receiver and a timer
appears showing the recording time.
Press the "PAUSE" key again to continue watching the
●
programme at the point where you left off.
Use the
and
●
in the recording.
Press the "STOP" key to deactivate the Time-Shift
●
function and resume watching the programme in real
time.
The recording is not saved in the memory.
●
The maximum recording time depends on the space
●
available on the USB device.
While the Time-Shift function is active, it will be impossible
●
to view any other programme and teletext and subtitles
will be unavailable.
42
keys to move forward and backwards