Changing Dab Stations; Scanning For Dab Stations; Prune Dab Stations; Storing A Dab Station Preset - THOMSON MIC200IDABBT Manual De Instrucciones

be selected when you switch the radio back on.

Changing DAB stations

1. Press the NEXT/PREV button to scroll through the available stations.
2. When the station that you would like to listen to is displayed, press the STOP/SELECT button to
select it. There will be a short delay whilst your radio tunes to your selected station.

Scanning for DAB stations

With DAB radio, additional stations and services regularly become available so it's a good idea to
occasionally perform a manual scan to ensure that you have the most recent station listing stored
within your radio's memory. If you have moved your radio to another location, e.g. if you go on holiday,
then it's also a good idea to perform a manual scan.
In DAB mode:
1. Press and release the PLAY/PAUSE/SCAN button to begin a search for stations. The display will
change to 'Scanning...'. A progress bar will display the scan progress and the number of stations
found during the scan will also be displayed.

Prune DAB stations

You can remove the DAB stations in the station list that cannot be received in your area.
In DAB mode:
1. Press and hold the Menu/Info button until <Full Scan> is displayed
2. Use the NEXT/PREV button to scroll to <Prune>. Press and release the STOP/SELECT button.
3. Prune? <No> Yes is displayed. Use the NEXT/PREV to scroll to Yes. Press and release the STOP/
SELECT button to confirm and prune the station list.

Storing a DAB station preset

Your radio can store up to 10 DAB radio stations in its preset memories for instant access to your
favourite stations.
1. Tune the radio to the DAB radio station that you wish to preset.
2. Press and hold the PROG/REP/PRESET button for approximately 2 seconds until Preset Store
<1:(Empty)> is displayed.
3. Use the NEXT/PREV button to move to the preset location to which you would like to store the
radio station (1-10).
4. Press and release the STOP/SELECT button, the display will confirm Preset X stored, where 'X' is
the number of the preset (1-10).
Note: If there is already an existing DAB station stored under a preset, it will be over-written when you
store the new station.

Tune to a DAB station preset

In DAB mode:
1. Press and release the PROG/REP/PRESET button. Preset Recall <1:> is displayed together with
the name or frequency of the station stored there, or (Empty) if no station has been stored.
2. Use the NEXT/PREV button to move to the preset location and station that you would like to listen
to (1-10).
3. Press and release the STOP/SELECT button. The radio will instantly tune to that station and begin
to play.
Note: If no DAB station has been stored under the PROG/REP/PRESET button, 'Preset Empty' will be
displayed, then the radio will revert to the previously selected radio station.
- EN 6 -