THOMSON MIC200IDABBT Manual De Instrucciones página 31

To cancel the random function, press the REPEAT/RANDOM button repeatedly until the "Normal" sign
appears.
PROGRAM PLAY
The tracks on the disc can be programmed to play in any order (up to 20 tracks can be programmed).
Note: this can only be done while in Stop mode
1. Press and hold the PROG/REP/PRESET button while in Stop mode. "P01" "F01" will appear on
the display and "T001" will flash.
2. Press either the PREV or NEXT button to select the desired tracks in the album, then press the
STOP/SELECT button to store in the memory.
3. The first track number is now stored in memory, and the program number changes to "P02",
waiting for your next selection.
4. Repeat Steps 1 – 3 to program additional tracks.
After programming is finished, press the PLAY/PAUSE/SCAN button, and programmed play begins
from the first programmed track. The player stops automatically after all programmed tracks have been
played. (Press the STOP/SELECT button twice to cancel the programmed tracks memory).
Playing Music via USB
This device has been developed using the latest technical advances in the USB field. However, given
the wide range of USB storage device types that are currently on the market, we unfortunately cannot
guarantee full compatibility with all USB storage devices. For this reason, in rare cases, there may be
problems in playing back files from USB storage devices. This is not due to device malfunction.
1. Press the POWER/MODE button repeatedly until 'USB' appears on the display.
2. Connect a USB storage device directly into the USB port. The display briefly shows the number of
folders and then the total number of tracks. Playback will automatically start after a few seconds.
3. Operation of the control buttons is the same as for MP3 playback. Please refer to MP3 DISC
SECTION operations as described previously.
NOTES:
• Always directly connect a USB storage medium to the USB port to prevent any malfunctions.
• The USB port is not designed for charging external devices.
• Important: Switch the device to a different operating mode before you remove the USB storage device.
Equaliser Function
With your unit switched on (not in Standby mode):
1. Press and hold the MENU/INFO button to enter the menu options.
2. Use the NEXT/PREV button to scroll to <System> then press the STOP/SELECT button.
3. Use the NEXT/PREV button to scroll to <Equaliser> then press the STOP/SELECT button.
4. Use the NEXT/PREV button to select and press the STOP/SELECT button to confirm.
Note: you can set the Equaliser function (e.g. My EQ, Normal, Classic, Jazz, Pop, Rock and Speech)
according to your individual preferences.
Wireless Charger Function
Simply place your wireless charging device on the wireless charger area indicated on the top surface
and charging will begin on contact.
USB Charging (5V Out)
The USB port is designed for charging external devices, such as smart phones.
AUX INPUT JACK
1. Press and hold the POWER/MODE button for 2 seconds to turn on the unit.
2. Press the POWER/MODE button repeatedly to select the Aux-In mode. 'Aux-In' will appear on the
LCD display.
3. Connect the AUX connect wire from the line out jack of your personal player (e.g. portable MP3
player) to the AUX input jack.
4. Start playback from your personal player.
- EN 13 -