Sutron XLINK100 Guia De Inicio Rapido página 4

3. LinkComm Session with XLink 100/500 via USB
Run LinkComm application, and do the following for USB interface:
Select "New Station"
Select "Station type" as per the unit model
Set "Connect type" to USB; "Device" shall automatically show MAC ID of XLINK 100/500
Press "Connect" to interact with the unit
4. LinkComm session with XLINK 100/500 via Wi-Fi
Follow steps 3.1 and 3.2
Set "Connect type" to "Station Wi-Fi";
Press "Connect" to interact with the unit ; If error "Please
connect to Station Wi-Fi" appears, check the PC Wi-FI
connection
3.1
EN-2
3.3
3.2
3.4
8800-1218 Rev C.