Sutron XLINK100 Guia De Inicio Rapido página 7

SIM Card Installation and Removal Instructions
Following section details the instructions involved in installation and removal of SIM cards for Sutron Cell
modems
1. Sutron Cell modems support only "micro SIM" size.
2. Care must be exercised while handling the sim card and modem.
2.1. Sim card should be handled using clean hands to avoid any dirt or smudges being left on the SIM
card.
2.2. The modem should be handled in a clean environment to prevent any dirt accumulation or ESD
damage.
3. To install the SIM card,
3.1. Remove the modem card from carrier board carefully. If the modem is installed in XLINK 100/500,
remove power to XLINK 100/500, and carefully pull the cellular board out.
Modem board
3.2. Flip the modem board carefully, without much stress on the U.FL cable; Insert the micro-sized sim
card, and push it all the way into the sim card slot as shown in pictures below
CARRIER board
EN-5
U.FL cable
8800-1218 Rev C.