MV Agusta Turismo Veloce 800 lusso Manual De Usuario página 175

Press the "OK" button to set the first digit of the code.
Press the "SET" or "MODE" buttons to select the
desired digit, then press "OK" to confirm. Similarly, the
other three digits of the code can be set.
NOTE: If a wrong digit is entered, it can be
cleared selecting the "C" letter at the end of
the number list.
After confirming the last digit, if the entered code is
4
correctly recognised by the system, the "CORRECT"
message appears. The dashboard display returns to the
"Running Mode". The engine can be started.
If the entered code is wrong, the "WRONG" mes-
sage is displayed. The system does not authorise the
engine to start; the display returns to the "PIN CODE"
mode. Repeat the code entering procedure from the
beginning, taking care to properly enter all digits shown
on the supplied MV Code Card. If further issues are
found, contact an authorised MV Agusta service centre.
OPERATION
- 52 -
4