Specification; Installation; Removing The Extractor Terminal Board; Example Of Connection In 2Voice And Ipercom Systems - Urmet Alpha Manual De Instalación

SPECIFICATIONS
Power voltage: ....................................................................................................................12 V~ o V
Maximum draw: .................................................................................................................... 260 mA @ 12 V~
Maximum stand-by consumption: ....................................................................................... 105 mA @ 12 V~
Maximum switchable relay load: ....................................................................................... 12 V~ / 24 V
Inputs "A1", "A2" and "H": .......................................................................... active if closed on terminal AH
Dimensions (W x H x D) ....................................................................................................... 120 x 90 x 25 mm

INSTALLATION

Power the device after having installed it correctly.
Caution.
Do not touch the keypad when switching on.

REMOVING THE EXTRACTOR TERMINAL BOARD

Lever on both side walls of the terminal board with a screwdriver.

EXAMPLE OF CONNECTION IN 2VOICE AND IPERCOM SYSTEMS

Rear view of the modules fi xed to the panel frame in tipped position.
DS1168-024A
A
Display module
A - 8 cm long cord provided
with numerical keypad and
alphabetic keyboard modules
Ref. 1168/46.
±10%
150 mA @ 12 V
50 mA @ 12 V
5 A
13