Description - Urmet Alpha Manual De Instalación

ENGLISH
INDEX
DESCRIPTION ................................................................................................................................................ 8
STRUCTURE .................................................................................................................................................. 9
DESCRIPTION OF TERMINALS ................................................................................................................. 9
PROGRAMMING FOR OPERATION IN STAND-ALONE MODE .................................................................... 9
MASTER PASSWORD PROGRAMMING PROCEDURE ............................................................................ 9
ACCESSING PROGRAMMING MODE ..................................................................................................... 10
RELAY OPTIONS PROGRAMMING PROCEDURE .................................................................................. 10
ACTIVATION CODE STORAGE PROCEDURE ......................................................................................... 10
DELETING AN ACTIVATION CODE .......................................................................................................... 11
SETTING A SLAVE PASSWORD FOR CHANGING ACTIVATION CODES ONLY .................................... 11
CHANGING A PREVIOUSLY STORED ACTIVATION CODE .................................................................... 11
TIMESLOT TERMINAL PROGRAMMING PROCEDURE .......................................................................... 12
DEVICE RESET (TO RESTORE DEFAULT SETTINGS) ................................................................................ 12
DEFAULT SETTINGS.................................................................................................................................... 12
MAINTENANCE ............................................................................................................................................ 12
SPECIFICATION ........................................................................................................................................... 13
INSTALLATION ............................................................................................................................................. 13
REMOVING THE EXTRACTOR TERMINAL BOARD................................................................................. 13
EXAMPLE OF CONNECTION IN 2VOICE AND IPERCOM SYSTEMS ..................................................... 13
CONNECTION DIAGRAM FOR SYSTEMS IN STANDALONE MODE ...................................................... 38
Notes on diagrams ............................................................................................................................... 39

DESCRIPTION

The numeric keypad module Ref. 1168/46 is a device for Mod. 1168 panels which can be used as a stand-
alone device or implemented in 2Voice and Ipercom systems.
In stand-alone mode, the device can operate as door opener with numeric code, while it can be used as
numeric keypad for calling when installed with the display module Ref. 1168/1.
For information how to use the device implemented in 2Voice / Ipercom systems, download the
booklet using the QR Code at the end of this booklet.
The main features are shown below:
• Possibility of managing two entrances with two relay door lock contacts which may be operated
independently using either of the programmed codes.
• 22 programmable user codes.
• Time management using input "H".
• Programmable door lock activation time for each of the two relays.
• Possibility of programming the two relays for monostable or toggle operation.
• Relay activation by means of two normally open buttons connected to inputs "A1" and "A2" (hall
buttons).
• 12 back-lit LED buttons (numbers from 0 to 9 white
• Sound feedback by means of buzzer.
Button lights up red during parameter programming.
(*)
8
and blue).
(*)
DS1168-024A