Garmin GHC 10 Instrucciones página 8

Manually Adjusting the Heading of
EN
the GHP 10 Autopilot System With
the GHC 10 Remote Control
You can manually adjust the heading of the
autopilot system with the arrow buttons on the
GHC 10 Remote Control.
Single arrows (
heading using "Rudder" steering. This adjusts the
heading in increments of 1°.
Double arrows (
heading using "Step" steering. This adjusts the
heading by the "Step Turn Size" defined on the
GHC 10 unit.
Note: For more information on "Rudder" and
"Step" steering, see the GHP 10/GHC 10 Quick
Start Manual.
Locking and Unlocking the GHC 10
Remote Control Buttons
Press and release the LoCK button (
lock all the GHC 10 Remote Control buttons
except the Mob button. When locked, the remote
control will beep when you press any button on
the remote control other than Mob button.
Press and release the LoCK button to unlock the
remote control buttons.
EN–
)—Manually adjusts the
)—Manually adjusts the
) to
Instructions