Harman JBL Radial Manual Del Usuario página 10

SYMPTOM
CHARGING SYNCING
iPod will not charge
iPod is not recognized by the
computer when docked into
the JBL Radial or there is an
error in data transfer.
SPECIFICATIONS
Manufacturer
Model
Driver (Full Range)
Drivers (Tweeter)
Power
Dimensions
Width:
Depth:
Height:
Input Impedance
Signal-to-Noise ratio
Frequency Response
Input Sensitivity
USA/Canada Power
Europe/UK
Japan
Australia
Maximum Power Consumption
UL/CUL/CE Approved
950-0113-001
POSSIBLE PROBLEM
Wrong adaptor is used.
The iPod is not making full
contact with the dock station.
Third party accessories may
be confl icting with the USB or
fi rwire signal.
USB or fi rewire port is not
supplying enough power
Harman Multimedia
JBL Radial
Hercules 45mm
Odyssey 25mm
1 x 30 watts (woofer),
2 x 15 watts (tweeters), at 1% THD
12.0 inches 305mm
5.25 inches 135mm
10.5 inches 270mm
>10k Ohm
>85dB
70 – 20 kHz
250 mV rms for rated power output
120 volts, 60Hz AC
220-230 volts, 50 or 60 Hz AC
100 volts, 50 or 60 Hz AC
240 volts, 50 or 60 Hz AC
55 watts
SOLUTION
Ensure correct adaptor is
used for your specifi c iPod
model.
Ensure iPod is seated
securely into the docking
station.
Make sure you do not have
the JBL Radial connected to a
USB or fi rewire hub.
Connect the JBL Radial
directly into the computers
USB or fi rewire port.
Try connecting the USB or
fi rewire cable to another port
on the back of the computer.
9
NOTE
JBL ® Radial Manual