Basic Operation - Nevir NVR-831 TBTU Manual De Instrucciones

BASIC OPERATION:

Connecting external dveices and operating with AUX in and LINE in.
(1) Listening from AUX IN jack:
6 Press the volume buttons to adjust volume level.
7 Press the TREBLE buttons on the Remote Control to adjust treble as desired.
8 Press the BASS buttons on the Remote Control to adjust BASS as desired.
9 Press the EQ preset mode buttons MUSIC; MOVIE or VOICE to turn on
the preset EQ effect as desired.
10 Press the MUTE button to turn off the sound, press again to resume.
11 When finished listening, press POWER button on the tower speaker or
Remote Control to power Off (Standby mode) the Speaker.
(2) Listening from 3.5mm LINE in jack:
1 Connect the Aux out jack from the external audio
player (such like DVD player, TV, VCR ...etc.) to
the AUX IN jacks on the rear of tower speaker by
the supplied RCA connection cable as the figure
shown:
2 Connect the tower speaker to the power source as
stated in previous procedures. The Standby indicator
will turn on.
3 Press the POWER button on the tower speaker or
Remote Control to power on the tower speaker.
4 Press the SOURCE button on the unit repeatedly or
the Remote Control to turn to AUX mode.
5 Power on the connected external player and start
playback as usual.
1 Connect the Headphone/Earphone; Line out jackfrom
the external audio player such like MP3 player.
Discman ,etc) to the LINE IN jacks on the rear oftower
speaker by the supplied Line In connection cable as
the figure shown:
2 Connect the tower speaker to the power as previous
procedures. The Standby indicator will turn on.
3 Press the POWER button on the tower speaker or
Remote Control to power on the tower speaker.
4 Press the SOURCE button on the unit repeatedly or
press the LINE button on the Remote Control to turn
to LINE mode.
5 Power on the connected external player and start
playback as usual.
6 Other operations are same as AUX IN mode.
19