Maintenance/Service - Moen nedia Guía De Configuración

MAINTENANCE/SERVICE

STEP 1:
Push down on the button at the
top of the bracket.
Button
Visit moen.com/nebia for tips and videos.
STEP 2:
Tilt the top of the bracket away
from the wall until the inlet
comes out of the adapter.
STEP 3:
Lift up until the lower bracket
disengages, then pull the bracket
away from the wall.
STEP 4:
Pull to remove the filter from
the end of the inlet. Rinse loose
debris off of the filter with water.
For mineral buildup, soak in a
vinegar solution until dissolved.
11