Dimplex BLF5051 Manual Del Propietário página 9

Fireplace Installation
Figure 3
Acrylic Tray screws (4)
Front Panel tabs (2)
glass, tilt the fireplace upright
and slightly forward to allow
the partially reflective glass to
fall out of the inside framing.
CAUTION: Partially reflective
glass is not tempered. Do not
bump or drop the partially reflec-
tive glass to avoid breakage and
personal injury.
• Remove partially reflective
glass from fireplace.
2. Locate the power cord and
remove the 3 screws that at-
tach the metal bracket to the
unit - one on the back of the
unit and two on the bottom.
(Figure 4)
3. From the front, remove the 2
Philips screws that fasten the
front panel tabs, tilt the panel
forward and lift off. (Figure 3)
Metal Tray
Screws (4)
Front Panel
Figure 4
Junction Box screws (3)
Figure 5
Electrical box
Screw
Figure 6
Junction
Box screw
White neutral
wires
Black live
wires
Wires to
controls
Wire connectors
9