System Requirements; Product Setup; Setup Wizard - D-Link DCS-6010L Guia De Instalacion

SySTEm rEQUIrEmENTS

• Computer with Microsoft Windows
• PC with 1.3GHz or above; at least 128MB RAM
• Internet Explorer 7 or above , Firefox 3.5 or above, Safari 4 and Chrome 8.0 or above
• Existing 10/100 Ethernet-based network or 802.11n wireless network

PrODUCT SETUP

setUP WiZarD

Step 1:
Rotate top cover counter-clockwise.
Step 2:
Lift cover to access Ethernet and power connectors.
Step 3:
Ensure the cables are seated in the cable channel.
Step 4:
Seat the cover and rotate to align the cable channel guide over the cable channel.
Step 5:
Connect the included Ethernet cable to attach it to the network. Attach the external
power supply to connect it to your wall outlet or power strip. Power is confirmed when
the green LED Power Indicator is lit.
Step 6:
Insert the DCS-6010L Driver CD in the CD-ROM drive.
If the CD Autorun function does not automatically start
on your computer, go to Start > Run. In the run box
type D:\autorun.exe (where D: represents the drive
letter of your CD-ROM drive) and click OK. When the
autorun screen appears, click Install and follow the
on-screen instructions.
Step 7:
Click on the Start button to start the wizard, and follow
the instructions from the Installation Wizard to finish
setting up your camera.
DCs-6010l
® ®
7, Vista , or XP (for CD-ROM Setup Wizard), Mac OS or Linux
Rotate
1
Ethernet
3
4
2
Power connector
3