How To Know The Firmware Version; External Sensor Symbol; Start/ Stop - Cryopak iMINI Guía De Usuario

i M I N I U s e r G u i d e
13.1.s How to know the firmware version
Firmware & information
The iMINI data logger is also capable of displaying firmware version, memory size and number of activated sensors, by

simply pressing the STOP button for 3-5 seconds, when it is not logging.
 The iMINI will cycle firmware version first. In this case, the firmware
version is 1.42.
Important Note:
The firmware version of iMINI data logger is being updated regularly for
features; your device may have a different one.
Then, memory size & No. of active sensors.

 Value before the decimal point denotes memory size of iMINI; in this case it
is 128K.
 Value after decimal point means number of active sensors; in this case
there are three active sensors on the iMINI.
13.2.s External sensor symbol
The iMINI with three sensors (MX-HE-S-8-L), external sensor is displayed as
13.3.s Start/ Stop
Start/Stop depends on how the loggers has been configured:
Rev. 3.1
iMINI LCD Display
Simple and Smart
Firmware
Memory size & sensors
Page 13