Leds; During Alarm; During Program /Download; Battery Status & Battery Change - Cryopak iMINI Guía De Usuario

i M I N I U s e r G u i d e
Text Flashing
HIGH ALARM
Constant
LOW ALARM
Text Flashing
LOW ALARM
Text Flashing
LATEST
Flash Once
MARKED
Constant
HIGHEST
*
LOWEST
AVERAGE
⁰
HOURS
Constant
*
⁰
Constant
*
Constant
*
*
Text or symbol display next to ooourrenoe (latest Temperature or Humidity)

LEDs

s
The iMINI has four LEDs, two red LEDs and two blue LEDs. These LEDs will function during program, download and when
any of the four alarms is triggered.
14.1.s During Alarm
The iMINI supports four alarm conditions. If the temperature goes out of
specification, respective LEDs will start flashing during logging and will remain
until the logger is reprogrammed.
LOW LOW

LOW

HIGH

HIGH HIGH

14.2.s During program /download
LED 2 (L) & 3 (H) will turn on solid during program or download of the iMINI
data logger.
Battery Status & Battery Change
s
LowsBattery:ss
It is highly recommended to change the iMINI battery as earliest possible in the following events:
s
If the LCD display appears to be dimmer than the normal.

Battery icon starts appearing on the LCD display of the logger.

'Low Battery' is reported by ConsolePlus software.

Rev. 3.1
Temperature went above HIGH HIGH alarm conditions
Temperature went below LOW alarm conditions
Temperature went below LOW LOW alarm conditions
iMINI is logging
A bookmark is placed (by pressing START button when logging for
3-5 seconds)
Highest, Lowest & Average temperature of the entire trip will cycle
on display when START button is pressed once
When START button is pressed twice to display time above/below
specifications
Celsius
Fahrenheit
Humidity
LL Blue LED
1
L Blue LED
2
H Red LED
3
HH Red LED
4
Simple and Smart
iMINI LED's
1 2 3 4
Page 15