Operation; Line-Up / Dimensions - Harpo Luxura Vs Manual Del Proprietário

+
Body cooling Body cooling
lower higher
Start
The machine is set up for standard use with an external timer or a coinbox. If the machine must function
without the external timer or coinbox, i.e. with an internal timer, the required tanning time will have to
be adjusted according to the following procedure.
General:
Hold the buttons for "body cooling lower" and "body cooling higher" down together for 10 seconds.
After 10 seconds, the display will show "00" (tanning time).
By pressing the button "body cooling higher" you can increase the tanning time (maximum 30 minutes).
By pressing the button "body cooling lower" you can decrease the tanning time.
Pressing the "start" button confirms the adjustment.
When confirming, there will be a short electronic bleep tone.
If the use of an external timer is chosen, the indication "-A" will be displayed.
The use of an internal timer will be indicated by the display of "-H".
Note
a. Should the set up need to be interrupted, this can be done by pressing the "stop" button.
b. If no adjustment is entered within 30 seconds, the operation will return to its original settings.
c. When using an external timer or a coinbox, the tanning time indicator must be set at 0.

Operation

8