Publicidad
Idiomas disponibles
Idiomas disponibles
Power driver and wiring
•
To allow for variance in the installation, it is not recommended to load the power driver beyond 90% of it's rated maximum power
- Xitanium LED driver 100 W (logistic code 929001669506) max 90 W
- Xitanium LED driver 80 W (logistic code 929001669406) max 72 W
- Xitanium LED driver 20 W (logistic code 929000654006) max 18 W
•
Use Philips InteGrade LED power cable of 1 m (39 inch) or 2.5 m (98 inch)
•
If InteGrade power cables are extended, only use 0.75 mm2 (AWG 18) or thicker cable uptil a length of max 10 m (32 feet) between
driver and Philips LED power cable
•
If you wish to make any other configuration, please contact Philips.
Wiring diagram with Philips InteGrade LED engines
Xitanium LED
Power Driver
24 VDC 80W
driver cable
approx 0.3 m
(12 inch)
To allow for variance in the installation, it is not recommended to load the power driver beyond
90% of it's rated maximum power.
© 2019 Signify Holding. IBRS 10461, 5600 VB, NL. All rights reserved. The information
provided herein is subject to change, without notice. Signify does not give any
representation or warranty as to the accuracy or completeness of the information
included herein and shall not be liable for any action in reliance thereon. The information
presented in this document is not intended as any commercial offer and does not form
part of any quotation or contract, unless otherwise agreed by Signify.
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
All other trademarks are owned by Signify Holding or their respective owners.
Document order number: 4422 409 67861
04/2019
Data subject to change
InteGrade LED
InteGrade LED
InteGrade LED
InteGrade LED
InteGrade LED
A
B
0.75 mm
2
Philips LED
(AWG 18)
power cable
max. 10 m
max. 2.5 m
(32 feet)
(98 inch)
www.philips.com/oem
www.philips.com/ledmodulesna
NA Customer Support/Technical
Service: Tel. (1)800-372-3331
Publicidad
