- In order to successfully link these units, make sure to use only one
transmitter to avoid interferences.
- For optimal transmission, ensure that the antenna of the transmitter
and receiver are not blocked or isolated.
5. The transmitter can work in two ways: Mono or
Stereo. When the button is not pressed, it means the
device is in Stereo Mode; if it is pressed, it means it
is in Mono Mode.
R
L
PEAK
NO
9V~ 50
7. Adjust the output signal of the receiver with the
volume control.
6. Peaks indicator: This light will turn on when the
input signal distorted.
AC
ST
MONO
0
-
+6dB
LEVEL
9 9