Honeywell TrueCLEAN Serie Guia De Instalacion página 18

Wiring the FH8000A (Air Handler) Honeywell Enhanced Air
Cleaner
CABLE CONNECTOR
TO SECURE POWER CORD
TO AIR HANDLER CABINET
Before proceeding to Startup and Operation on page 19:
I wired the Honeywell Enhanced Air Cleaner as instructed.
16
FUSED POWER CONNECTOR LEADS
AIR PURIFIER
FROM INSTALLATION COMPONENTS
POWER CORD
(IN BAG ATTACHED TO POWER CORD)
GROUND:
ATTACH TO AIR HANDLER
GROUND (CHASSIS)
Fig. 13. Honeywell Enhanced Air Handler chassis ground.
AIR FLOW SENSOR
1) SLIDE FLOW SENSOR TABS
INTO SUPPORT BRACKET
Fig. 14. Airflow Switch installation.
FH8000A Wiring is complete. Go to page 19.
5 AMP IN-LINE FUSES TO AIR HANDLER FIELD POWER CONNECTION
2) ROTATE FLOW SENSOR
AND CLIP INTO BRACKET
TrueCLEAN™ Enhanced Air Cleaner 68-0308EFS—03
TO L2 FIELD POWER SUPPLY
TO L1 FIELD POWER SUPPLY
M28911
M28912