ENG
VI.- TROUBLE SHOOTING
IN CASE OF A FIRE IN THE FIREPLACE OF CHIMNEY,
TAKE THE FOLLOWING MEASURES:
INMEDIATELY CLOSE ALL THE AIR VENTS:
A)
Front door
B)
Ashtray
C)
Primary air vents
FOLLOWING
INFORM
LOCAL AUTHORITIES ABOUT THE EVENT
VII.- VENTILATOR SYSTEM
The system of the Ventilators is done in order to make an air flow through the chamber from ambient to hot air, expelled into the front air vents.
Regarding the regulation, you can use the interrupter placed in the front of the insert (behind the door) working with three positions:
Position O - The fans start working when the temperature has reached a certain degree, controlled by the thermostat.
Position I - Constant working in slow speed.
Position II - Constant working in fast speed.
The regulation of flow of air in F700, F800, F-900 & F-1000, is made manually with a potentiometer, provided with the appliance. It must be installed according
to the diagram enclosed. To regulate the flow of air you have to turn the potentiometer. When reached the minimum point you will hear a click, by means the
ventilators will stop and will start again automatically when a certain temperature is reached in the chamber, controlled by the thermostat.
Ventilators are provided with each TJ inserts, and have the following features: 220 / 230 V; 50 / 19 W (24 W with potentiometer) - Protection Degree IP54
IMPORTANT: The ventilators must be always connected to the power supply.
THE
FIREFIGHTING
THE FUEL DOESN'T BURN
WELL
•
Check if the fuel is damp
•
Empty the ashtray
•
Remove any obstruction in the air vents
•
Open the damper
20