Axis P13-E Serie Manual De Instalación página 12

Page 12 AXIS P13-E Network Camera Series Installation Guide
Cold Startup Delay Switch
The housing used in this Axis product features Arctic Temperature Control, which is enabled by
setting the Cold Startup Delay switch to I (ON). When enabled, this function controls when the
camera restarts after a power cut, when temperatures are below 0 °C (32 °F); the camera is first
heated to approximately 0 °C (32 °F) before it initializes. This prevents damage to camera models
that include moving parts. Since this camera does not require this function, it is disabled by default.