Maintenance And Care; Disposal; Warranty And Servicing - Tru-Test HD5T Guia De Inicio Rapido

7

Maintenance and care

 Ensure that the underside of the crush/chute and gap between the load bar
housing and load bar foot is kept free of dirt and stones.
Do not leave the indicator, load bars or plugs immersed in water.

Cables should be installed so that they will not be damaged. We recommend

routing the cables through plastic casing/conduit to help prevent damage.
When not in use, always replace the dust caps on the load bar plugs. When the

load bars are connected to the indicator, screw the two dust caps together.
Remove dust and moisture from the plugs and caps using methylated spirits,

ethyl alcohol, or a suitable electrical contact cleaner. Stronger spirits must not
be used, as they may react with the plastic.
8

Disposal

This symbol on the product or its packaging indicates that this product must not
be disposed of with other waste. Instead, it is your responsibility to dispose of
your waste equipment by handing it over to a designated collection point for the
recycling of waste electrical and electronic equipment. The separate collection
and recycling of your waste equipment at the time of disposal will help conserve
natural resources and ensure that it is recycled in a manner that protects human
health and the environment. For more information about where you can drop off
your waste equipment for recycling, please contact your local city recycling office
or the dealer from whom you purchased the product.
9

Warranty and servicing

For service and warranty information, see www.tru-test.com/product-warranty
9