Publicidad
Idiomas disponibles
Idiomas disponibles
FUNCTIONAL DESCRIPTION
Specifications
Model: .............................................TKBS-6211
Abrasive Belt Size: .....................110 x 620 mm
No-Load Speed: ..........................350 / 300 rpm
Rated Input Power: ........................950 / 860 W
Rated Voltage: .........................................110 V
Rated Frequency: ....................................60 Hz
CAUTION:
• Always be sure that the tool is switched off
and unplugged before adjusting or checking
function on the tool.
Switch action
1. Lock button 2. Switch trigger
CAUTION:
• Before plugging in the tool, always check to
see that the switch trigger actuates properly
and returns to the "OFF" position when
1
released.
1
• Switch can be locked in "ON" position for
2
ease of operator comfort during extended
use. Apply caution when locking tool in "ON"
position and maintain firm grasp on tool.
To start the tool, simply pull the switch trigger.
Release the switch trigger to stop.
1
1
2
1
2
3
For continuous operation, pull the switch trigger
and then push in the lock button.
To stop the tool from the locked position, pull
the switch trigger fully, then release it.
ASSEMBLY
CAUTION:
• Always be sure that the tool is switched off
and unplugged before carrying out any work on
the tool.
Installing or removing abrasive belt
2
1. Lever
Pull the lever all the way out and install the
belt over the rollers, then return the lever to the
original position.
CAUTION:
2
3
1
5
1
1
1
1
2
1
1
2
1
1
Publicidad
