Weighing An Animal; Changing Indicator Settings - Tru-Test S2 Guia De Inicio Rapido

Weighing an animal

3
Ensure that the indicator is displaying 0.0. If not, press
1. Move the animal onto the platform.
2. When the stable light illuminates, the indicator has locked onto the animal's
weight.
3. Move the animal off the platform.
If the indicator is not displaying 0.0 between animals or there are problems
with inaccurate or unstable weights, make sure that the bars are firmly
secured to the concrete floor and free from stones or dirt and that the load
bars are properly connected to the indicator.

Changing indicator settings

4
Data Link enables you to change settings on the indicator such as displaying metric or
imperial measurements during weighing.
1. Ensure that your PC has internet connectivity and download the Data Link PC
Software from livestock.tru-test.com/applications/datalink
2. Connect the indicator to your PC with the supplied USB cable or via
3. Launch Data Link on your PC; click
6
, and Settings.
.
Bluetooth
®.