Maintenance And Care; Caring For The Weigh System; Europe - Instructions For Disposal Of Product; Warranty And Servicing - Tru-Test S2 Guia De Inicio Rapido

Maintenance and care

5

Caring for the Weigh System

Keep the underside of the weigh platform and load bars free from dirt or stones.
•
Do not leave the indicator, load bars or indicator connector immersed in water.
•
Cables should be placed under the weigh platform to prevent damage.
•
When not in use, always replace the dust cap on the indicator connector.
•
Remove dust and moisture from the plugs and dust cap using methylated spirits,
•
ethyl alcohol, or a suitable electrical contact cleaner. Stronger spirits must not
be used, as they may react with the plastic.

Europe - Instructions for disposal of product

This symbol on the product or its packaging indicates that this product (and its
battery) must not be disposed of with other waste. Instead, it is your
responsibility to dispose of your waste equipment by handing it over to a
designated collection point for the recycling of waste electrical and electronic
equipment. The separate collection and recycling of your waste equipment at
the time of disposal will help conserve natural resources and ensure that it is
recycled in a manner that protects human health and the environment. For
more information about where you can drop off your waste equipment for
recycling, please contact your local city recycling office or the dealer from
whom you purchased the product.
This product incorporates a lithium-ion (IFpR19/66, 4.8 Wh) rechargeable battery.
For instructions on how to dismantle this product for recycling, email
contact@trutest.co.nz.

Warranty and servicing

6
For service and warranty information, see www.tru-test.com/product-warranty
7