Troubleshooting - LG BNU-BAC Manual De Instalación

Troubleshooting

Troubleshooting
- Problem : The Power LED of the BACnet Gateway is not lit.
→ If the power is normally applied, the Power LED is lit.
- Expected cause : The power is not applied
The specified adaptor is not used
- Diagnosis
Is the power is applied?
Is the specified adaptor used?
Apply the power via
the specified adaptor
The power switch should be turned off when connecting/disconnecting the BACnet
Gateway to/from the other device. Otherwise, it may cause to damage the part of the
Gateway.
86 BACnet Gateway
YES
NO
NO
Apply the power