Product overview
A. Micro SD card slot
B. On/off/recording/photo/standby button
C. Reset (only press in the event of problems!!)
D. USB port
E. Wi-Fi button / switch button for changing between 720p and 1080p
F. Red LED (signals charging status)
G. Yellow LED (signals Wi-Fi status)
H. Blue LED (signals 1080p recording status)
I. Green LED (signals 720p recording status)
J/N. Microphone (left and right for stereo recording)
K. Adjustable nosepads
L. Replaceable frame pads
M. Camera with adjustable angle
Operation
Start video recording
In order to switch the camera on, simply press the on/off button for 1 second.
The green or blue LED lights up (depending on the recording mode - 1080p or 720p)
and the device is initialised.
After approximately 2 to 3 seconds the glasses will vibrate twice and the blue or
green LED will flash slowly in order to signal the beginning of the recording.
End video recording
In order to stop the playback, simply press the on/off button for 2 seconds.
The glasses will vibrate for 3 seconds and the green or blue LED will flash quickly for
3 seconds.
The video file is saved and the device switches itself off.
CAUTION: In order to limit the size of the file the recording ends after 30 minutes
and a new video is then started. This interval can be changed if necessary (from a
selection of 5, 15 or 30 minutes).
Record a video while charging
The camera automatically records when charging.
CAUTION: If you do not want the camera to do this, simply remove the micro SD
card before charging.
Taking photos
Press the on/off button briefly during the recording (for approximately 1 second).
The device is now in standby mode. Click on the on/off button twice briefly and the
glasses will vibrate for a short period of time. The green or blue LED signals the
ACE Instruments (/ ACE Handels und Entwicklungs GmbH / Staufenstraße 1 / Hallen 8-14 / 83395
Freilassing / Germany
Tel: +49(0)8654 / 77 953-31 / Fax: +49(0)8654 / 77 99 694 / Email: info@ace-instruments.net / Web:
www.ace-instruments.net
16